Finally got the brake working! In the end it turned out that my bleeding nipple was leaking. It was a non original one placed in a drilled out hole 🤔 A new brake caliper fixed it. Unfortunately the brake fluid messed up my fresh paint work, so that needs some attention again later. Next job on the list: paint the tank!
So installing the brand new wiring harness and dashboard control lights didn’t work out at once. The new LED control lights for oil pressure and neutral only flashed shortly when turning the ignition key. After a day of thinking and googling I found the cause: these LED lights have a red and black wire. Turns out black is plus and red is ground where I had assumed the opposite. I took the wiring out and mended this. Lights work; a happy man 😁
Throwback: taking apart
6 sparks
Danny Van loon
@felix.hofte thanks! I just found it out and will organize some past photo’s there 😊👍
Tingnan ang lahat ng 3 komento
I-download ang Wrench app sa Appstore at Google play
Ipasok ang iyong numero at makakuha ng isang isang beses na link sa SMS.