Finally got the brake working! In the end it turned out that my bleeding nipple was leaking. It was a non original one placed in a drilled out hole 🤔 A new brake caliper fixed it. Unfortunately the brake fluid messed up my fresh paint work, so that needs some attention again later. Next job on the list: paint the tank!
Wrapped the exhaust. More work than I thought.
8 gnistor
So installing the brand new wiring harness and dashboard control lights didn’t work out at once. The new LED control lights for oil pressure and neutral only flashed shortly when turning the ignition key. After a day of thinking and googling I found the cause: these LED lights have a red and black wire. Turns out black is plus and red is ground where I had assumed the opposite. I took the wiring out and mended this. Lights work; a happy man 😁
Throwback: taking apart
6 gnistor
Danny Van loon
@felix.hofte thanks! I just found it out and will organize some past photo’s there 😊👍
Visa alla 3 kommentarer
Ladda ner Wrench-appen på Appstore och Google play
Ange ditt nummer och få en engångs SMS-länk.